GallonGaugeGallons, first-hour rating and GPM — the three numbers that decide it.

Water heater replacement cost in Montana: 50-gallon gas

A 50-gallon gas water heater replacement in Montana
$1,919
the most common replacement in American homes · typical range $1,349 – $2,801
Typical totalinstalled, 50 gallon gas$1,919
Range you should see in bidsthree bids on the same scope normally land inside this$1,349 – $2,801
Labor portion45% of the job — this is the part that moves by state$864
Material portion55% — bought at national prices$1,056
Plumbers, Pipefitters, and Steamfitters pay in Montanaabout $38/hr · BLS OEWS May 2025, SOC 47-2152$78,190/yr
U.S. mean for the same tradeSOC 47-2152$72,170/yr
Versus the national priceMontana trade pay runs +8.3% against the U.S. mean+$69

Notes

  • Where the number comes from. The national price for a 50-gallon gas water heater replacement is $1,850 installed — water heater replacement pricing published for 2026, unit plus installation. Labor is about 45% of that. Plumbers, Pipefitters, and Steamfitters in Montana average $78,190 a year against a U.S. mean of $72,170 — a factor of 1.083 — so the labor half is scaled by that and the material half is not.
  • What is in the price: the heater, removal and disposal of the old one, new flex connectors, a drain pan, an expansion tank where code requires it, and labor.
  • What is not: a gas line upsize, new venting, an electrical circuit for an electric unit, and bringing an old install up to current code. These are the lines that turn a $1,919 quote into a $2,399 invoice, so ask about each one before signing.
  • Why state matters more than people expect. Materials ship at national prices; crews do not move. Montana sits above the national mean by 8.3%, which lands on 45% of the job and moves the total by $69.
  • Use this as a bid check, not a quote. It prices an average job in an average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average for the job.

Replacing a 50-gallon gas water heater in Montana

$1,919 is the typical installed figure for a 50-gallon gas water heater replacement in Montana, and bids normally land between $1,349 and $2,801.

This is a job price, not a unit price. Nobody quotes it per amp, per grain or per gallon, and any number that pretends otherwise is working backwards from a total it already picked.

Why this is not the national number

The same job priced at the U.S. average comes to $1,850 — this one is $69 more.

The reason is one number, and it is a published one. Plumbers, Pipefitters, and Steamfitters in Montana average $78,190 a year against a U.S. mean of $72,170, from the Bureau of Labor Statistics OEWS release for May 2025, SOC 47-2152. That is roughly $38 an hour of trade pay, a factor of 1.083, or +8.3% against the national mean.

Labor is about 45% of this job. Material is the other 55%, and a box of fittings costs the same in every state it is opened in. So only the labor half is scaled here, and the material half is left at national pricing.

That is the whole model, and it is deliberately simple enough to check: $864 of labor, $1,056 of material.

Replacing like for like is the cheap path, and usually the right one

A same-type, same-size swap reuses the gas line, the vent, the water connections and the space. Every change away from that adds a trade. Going from electric to gas needs a gas line and a vent. Going from tank to tankless usually needs both upsized. Those are the lines that turn a routine replacement into a project, and they are why two quotes on "a new water heater" can differ by three thousand dollars.

Code catches up with you at replacement

An expansion tank where the supply has a check valve, a drain pan with a run to daylight, seismic strapping in the west, a dedicated shutoff, and sediment-trap details on the gas line. None of it was required when the old unit went in and all of it is required now. A quote that is conspicuously cheap is often a quote that skips these, and they surface at inspection.

Buy for recovery, not for the tank number

A 40-gallon gas heater with a strong burner delivers more hot water in an hour than a 50-gallon electric with two elements, because first-hour rating combines what is stored with what can be reheated. That single figure is on the yellow EnergyGuide label, and it is the number that decides whether anyone runs out.

How to use this against a real bid

Three quotes on identical scope should cluster. One well under $1,349 usually means something was left out of the scope rather than found cheaper — read the exclusions before reading the total. One well over $2,801 is either a harder job than average or a crew that does not want the work and priced accordingly.

The figure above prices an average job in average condition. Access, the age of what is being replaced, the season, and how booked the crew is all move it.

Nearby sizes

Read more