GallonGaugeGallons, first-hour rating and GPM — the three numbers that decide it.

How much does a water heater replacement cost in Gillette, WY?

A 50-gallon electric water heater replacement in Gillette, WY
$1,451
the usual electric swap — cheaper to buy, dearer to run · typical range $1,029 – $2,153
Typical totalinstalled, 50 gallon electric$1,451
Range you should see in bidsthree bids on the same scope normally land inside this$1,029 – $2,153
Labor portion45% of the job — this is the part that moves by city$653
Material portion55% — bought at national prices$798
Plumbers, Pipefitters, and Steamfitters pay near GilletteBLS does not publish a metro figure for plumbers, pipefitters, and steamfitters near Gillette, WY, so this is the Wyoming state average, SOC 47-2152$61,890/yr
U.S. mean for the same tradeSOC 47-2152$72,170/yr
Versus the national pricetrade pay here runs −14.2% against the U.S. mean−$99

Notes

  • Where the number comes from. The national price for a 50-gallon electric water heater replacement is $1,550 installed — water heater replacement pricing published for 2026, unit plus installation. Labor is about 45% of that. Plumbers, Pipefitters, and Steamfitters near Gillette, WY average $61,890 a year against a U.S. mean of $72,170 — a factor of 0.858 — so the labor half is scaled by that and the material half is not. Source: BLS does not publish a metro figure for plumbers, pipefitters, and steamfitters near Gillette, WY, so this is the Wyoming state average, SOC 47-2152.
  • This one falls back to a wider average. BLS did not publish a metro-level wage for this trade near Gillette, WY, so the figure above is a state average. It is still the right order of magnitude, but a local bid carries more weight here than it would in a large metro where the survey has more responses.
  • What is in the price: the heater, removal and disposal of the old one, new flex connectors, a drain pan, an expansion tank where code requires it, and labor.
  • What is not: a gas line upsize, new venting, an electrical circuit for an electric unit, and bringing an old install up to current code. These are the lines that turn a $1,451 quote into a $1,813 invoice, so ask about each one before signing.
  • Use this as a bid check, not a quote. It prices an average job in average condition. Difficult access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average for the job.

a 50-gallon electric water heater replacement in Gillette, WY

$1,451 is the typical number, and three bids on the same scope normally land between $1,029 and $2,153.

That is $99 less than the same job priced at the national average.

Why the city changes the number

About 45% of this job is labor — $653 of the $1,451 above. Labor is the only part that moves locally; a bundle of material costs what it costs wherever it is nailed down.

Plumbers, Pipefitters, and Steamfitters near Gillette average $61,890 a year, against a U.S. mean of $72,170. That is a factor of 0.858, so the labor half is scaled by it and the material half is not.

Source: BLS does not publish a metro figure for plumbers, pipefitters, and steamfitters near Gillette, WY, so this is the Wyoming state average, SOC 47-2152.

What the quote should include

The lines that turn a quote into an invoice

Ask about each of them before you sign. On a job this size they are the difference between $1,451 and something a quarter higher.

Use it as a bid check, not a quote

This prices an average job in average condition. Access, the state of what is being replaced, the season, and a crew booked out three months all move the real number, and none of them are in a national average.

If a bid lands outside $1,029 – $2,153, that is not automatically wrong — but it is the question worth asking out loud.

Nearby sizes

Read more